operating efficiency 83-84% impedance es015-10: <100m , es030-5: <200m , es075- 2:< 250m ,es0300-0.45: <5 . holdup time (230vac input) 25ms (vout = 100%, iout = 100%) minimum load no parallel operation yes, master/slave operation possible series operation yes, total voltage must not exceed 600v programming voltage 0?5v programming speed see table remote inhibit yes, +5v or relay contact meters digital 3.5 digits indicators cv, cc standards and approvals safety standards en61010 / en60950 emc standards en61204-3, en61000-6-2 emi standards en61000-6-3 (en55022b) mechanical mounting bench mounting. rack mounting optional case ip20 dimensions / weight 52h x 222w x 202d mm / 1.7kg es series 150 watts programmable dc supply features ? autoranging input ? small and light ? 10 turn potentiometer control ? programmable by 0?5v ? emc standard en61204-3 ? short circuit protected ? optional ethernet, rs232 and ieee488 programming interface. model number output voltage (0v to) output current (0a to) ripple & noise cv cc program speed es015-10 15v 10a 8mv p-p 10ma p-p 7ms es030-5 30v 5a 10mv p-p 2ma p-p 15ms ES075-2 75v 2a 15mv p-p 0.5ma p-p 17ms es0300-0.45 300v 0.45a 50mv p-p 0.2ma p-p 10ms specifications input voltage range ac 90?265v, 48hz?62hz inrush current 10a with ntc resistor 30 cold resistance. power factor 0.99 / 0.83 (110 / 230 vac) isolation i/p to o/p: 4000vrms (1 min.), creepage: 8mm i/p to case: 2500vrms, o/p to case: 600vdc output power 150 watts voltage regulation load 0%?100%: es015-10: 15mv, es030-5: 6mv, ES075-2: 5mv, es0300-0.45: 10mv (internal sensing, optional external sensing available on request). line, 90-265vac es015-10: 0.2mv, es030-5: 0.5mv, ES075-2: 1mv, es0300-0.45: 3mv current regulation load 0%?100%: es015-10: 3ma, es030-5: 1ma, ES075-2: 0.5ma, es0300-0.45: 0.3ma. line, 90-265vac es015-10: 0.5ma, es030-5: 0.2ma, ES075-2: 0.1ma, es0300-0.45: 0.05ma. voltage/current adjustment by 10-turn potentiometers, resolution 0.03% ripple & noise pk-pk see table overvoltage protection (fixed) es015-10: 18v, es030-5: 40v, ES075-2: 90v, es0300-0.45: 330v. short circuit protection yes overload protection yes temperature coefficient cv: 5x 10 -5 /c, cc: 10x 10 -5 /c. environmental operating temperature -20c to +50c storage temperature -40c to +85c humidity max. 95% rh, non condensing, up to 40c. max. 75% rh, non condensing, up to 50c. derating above 50c, derate linearly to 20% @ 75c cooling convection thermal protection output shuts down in case of insufficient cooling. mtbf 500,000 hours selection table 460 laboratory
your dependable power partner ? www.powerbox.com.au 461 laboratory es series 150 watts programmable dc supply options screwdriver adjustment - option p001 master / slave operation increased max. output voltage / current - option p069 remote sensing / rear power outlet - option p119 - 122 internal ethernet power supply controller - option p150 internal rs232 power suply controller - option p148 external ieee488 power supply controller - psc 488 ext technical illustrations
|